WP1FCSH150QTW/PC

Fully shielded, Full Cutoff Wallpack for higher wattages! Full Cutoff optics with flat tempered glass lens. EZ mount knockouts for easy wiring. Lamp included.

• Photocontrol mounting hole
• Precision die cast aluminum housing with durable polyester powder coating
• Easy access conduit openings & ballasts for fast internal wiring
• Long life lamp included
• Silicone gasket remains in place during relamping
• Cutoff Glare Shield for "Friendly" Lighting
• Hinged door swings open and remains captive for easy relamping

• UL Listing:
  Suitable for wet locations. HID fixtures can be wired with 90° C supply wiring if supply wires are routed 3" away from the ballast.
• Housing:
  Die cast aluminum, 1/2" NPS tapped top, both sides and back for conduit or photocontrol. Hinged refractor. Continuous one piece silicone rubber gasket.
• Reflector:
  Semi-Specular anodized aluminum, removable for installation. Symmetrical light pattern maximizes distance between fixtures.
• Finish:
  Chip and fade resistant polyester powder coating.
• Photocell:
  Button Photocell installed and wired for 120V
• Quad Tap:
  Fixture works with 120, 208, 240 and 277 Volts
• Conduit Openings:
  Top, side, back and bottom
• Cradle:
  Capacitor cradle for better heat absorption.
• Mounting:
  Knockouts for easy wall box mounting
• Lamp Information:
  Type: HPS
  Watts: 150W
  Shape/Size: ED17
  Base: Medium
  ANSI: S55
  Hours: 24000
  Initial Lumens: 16000
• Lumens Per Watt: 85
• Ballast Information:
  Type: HX-HPF QT
  Input Watts: 188W
  Efficiency: 80%
  Start/Operating Amps
  120V: 2.0/1.7
  208V: 1.2/1.0
  240V: 1/1.9
  277V: .9/.8