RAB VAN15HH100QT/PC

11" or 15" round fixture. 35, 50, 70, 100 & 150w HPS lamp or 50, 70 & 100 watt Metal Halide. Housing is die formed heavy gauge aluminum in bronze enamel finish with clear vandalproof polycarbonate refractor.

• Both Vandal Proof Center Pin Torx and Slotted Phillips Head Screws supplied.
• Tough Polycarbonate Refractors
• Backboxes available for conduit entry

• UL Listing:
  Suitable for wet locations. Fixtures can be wired with 90° C supply wiring if supply wires are routed 3" away from ballast.
• Refractor:
  Injection molded polycarbonate, designed for maximum structural strength.
• Reflectors / Backplate:
  Heavy gauge cold rolled steel with high reflectance baked white enamel.
• Sockets:
  HPS & MH: Medium base 4kv Pulse Rated Glazed porcelain CFL: Plug-in type, thermoplastic
• Screws:
  Tamperproof center pin Torx-head and slotted Phillips head stainless steel screws provided. Be sure to order your Torx screwdriver.
• Fluorescent Ballast Starting Temperatures:
  Electronic QT: 0° F/ -18° C NPF 120V: 32° F / 0° C
• Quad Tap:
  Fixture works with 120, 208, 240 and 277 Volts
• Photocell:
  Button Photocell installed and wired for 120V
• Lamp Information
  Type: MH
  Watts: 100W
  Shape/Size: ED17
  Base: Medium
  ANSI: M90
  Hours: 15000
  Initial Lumens: 9000
• Ballast Information
  Type: HX-HPF QT
  Input Watts: 129W
  Efficiency: 78%
  Start/Operating Amps
  120V: 1.2/1.2
  208V: .7/.7
  240V: .7/.8
  277V: .6/.5