RAB WP1FCH50QTW/PC2

Fully shielded, Full Cutoff Wallpack for higher wattages! Full Cutoff optics with flat tempered glass lens. EZ mount knockouts for easy wiring. Lamp included.

• Photocontrol mounting hole
• Precision die cast aluminum housing with durable polyester powder coating
• Easy access conduit openings & ballasts for fast internal wiring
• Long life lamp included
• Silicone gasket remains in place during relamping
• Cutoff Glare Shield for "Friendly" Lighting
• Hinged door swings open and remains captive for easy relamping

• UL Listing:
  Suitable for wet locations. HID fixtures can be wired with 90° C supply wiring if supply wires are routed 3" away from the ballast.
• Housing:
  Die cast aluminum, 1/2" NPS tapped top, both sides and back for conduit or photocontrol. Hinged refractor. Continuous one piece silicone rubber gasket.
• Reflector:
  Semi-Specular anodized aluminum, removable for installation. Symmetrical light pattern maximizes distance between fixtures.
• Finish:
  Chip and fade resistant polyester powder coating.
• Photocell:
  /PC2 = 277V
• Quad Tap:
  Fixture works with 120, 208, 240 and 277 Volts
• Conduit Openings:
  Top, side, back and bottom
• Cradle:
  Capacitor cradle for better heat absorption.
• Mounting:
  Knockouts for easy wall box mounting
• Lamp Information:
  Type: MH
  Watts: 50W
  Shape/Size: ED17
  Base: Medium
  ANSI: M110
  Hours: 10000
  Initial Lumens: 3400
• Lumens Per Watt: 50
• Ballast Information:
  Type: HX-HPF QT
  Input Watts: 68W
  Efficiency: 74%
  Start/Operating Amps
  120V: .6/.6
  208V: .35/.35
  240V: .3/.3
  277V: .25/.25